Differences

This shows you the differences between two versions of the page.

--- nimrod_2022 [2022/09/14 06:53] – simonw7
+++ nimrod_2022 [2022/09/14 06:54] – simonw7
@@ Line 42: / Line 42: @@
   . <script name>
-Now that the necessary modules have been loaded the code can be compiled. There are two main methods of doing this at NERSC. The first is to use the mknimall.sh script provided if nimall is checked out. Alternatively, Jake King's config scripts may be used to build the code on Cori.
+Now that the necessary modules have been loaded the code can be compiled. There are two main methods of doing this at NERSC. The first is to use the mknimall.sh script provided if nimall is checked out. Alternatively, Jake's config scripts may be used to build the code on Cori.
 ====   mknimall method  ====
@@ Line 58: / Line 58: @@
 and check the executables are there. /par/bin will contain the executables for the parallel build and /ser/bin will contain the executables for the serial build of Nimrod.
-====   Jake King's scripts method  ====
+====   Jake's config scripts method  ====
 Alternatively, pre-existing configure scripts created by Jake King may also be used. This section will give instructions on how to copy over and use these scripts on Cori. These will also work if the nimdevel only branch is checked out, which does not contain the mknimall.sh script.